cBrandon Community

List Rules with Line Numbers
iptables -L --line-numbers

Deletes Rule with line Number
iptables -D INPUT 3

Add port accessible to wan
iptables -A INPUT -p tcp -m tcp --dport 8040 -j ACCEPT

Dump sql data into database use cmd:
mysql -u <user name> -p<password> <database name> < sqlfilename.sql

dump data with no password on database
mysql db_name < backup-file.sql

Install Kodi
1. Open Cmd and type Sudo apt-get update.
2. Sudo apt-get install kodi
3. Open system - file manager- add sources put http://fusion.tvaddons.ag
4. Open system - settings - install from zip choose fusion
5. Install start here and install all 3 zip files

6. If you want to start when the pi boots edit. /etc/default/kodi and change ENABLED to 1

 default Windows 10 Pro key VK7JG-NPHTM-C97JM-9MPGT-3V66T

SCENARIO 3: UPGRADING A NEW PC FROM HOME TO PRO

Let's say you buy a new PC with Windows 10 Home installed by the OEM. When you check the Activation page in Settings, it should look something like this:


If you have a Windows 10 Pro product key, you can click the Change Product Key button and enter it here. Easy.

If you don't have a Pro product key and you want to buy one, you can click Go To Store and purchase the upgrade for $100. Also easy.

But what if you have a Windows 7 Professional or Ultimate key, or a Windows 8/8.1 Pro key? In that case, you need to do the upgrade in two steps.

First, make sure you've installed the November update and you are running version 1511.

Next, click Change Product Key and enter the default Windows 10 Pro key (see above). After the upgrade completes, check the Activation screen again and you'll see this:


What, you were expecting that default key to magically give you a $100 upgrade? Sorry, that's not how it works, despite what you might have read elsewhere.

Instead, click the Change Product Key button and enter your Windows 7 Pro/Ultimate or Windows 8/8.1 Pro key. Assuming it's a legitimate key and you are running Windows 10 version 1511 or later, your activation should complete successfully.

If that process seems cumbersome, you're right. It does go fairly quickly, however.

Aux - Setup (2 blinks) - 11144 (2 blinks)
Aux - Setup (2 blinks) - 994 - Setup - 00169 - Vol Up - Should get 2 blinks
Aux - Setup (2 blinks) - 994 - Setup - 00168 - Vol Down - Should get 2 blinks
Aux - Setup (2 blinks) - 994 - Setup - 00037 - Mute - Should get 2 blinks
Aux - Setup (2 blinks) - 994 - Setup - 00165 - Power - Should get 2 blinks
Aux - Setup (2 blinks) - 994 - Setup - 00164 - Input - Should get 2 blinks

qwinsta /server:server       which will list the current sessions and their status,

rwinsta /server:server <sessionid>     This is to disconnect a session.

Adjust ADMINISTRATION/Default job options/image adjustment.
Select DARKNESS = 0. Save and Home.   
Try to scan again and all should be well.

 Do a search for "Default Picture" put on desktop or some folder to find then open setting and choose user pic to set.

I found an answer through some easy googling that seems to have worked...there are three folders in the AVG folder in Program Files that you need to delete, but you have to disable avg first...

1. Disable AVG self protection:
Right click the AVG icon in the taskbar (near the clock)
Select to Temporarily Disable AVG Protection
Agree the default timeout - usually 10 minutes?​
2. Open My Computer or Windows Explorer and Navigate to:
C:\Program Files\AVG\AVG201x\ ...... for 32bit systems (201x means 2013 or 2014)
C:\Program Files (x86)\AVG\AVG201x\ for 64bit systems​
3. Delete the following three folders: Awacs, Banners, Tuneup
Do not delete anything else you see inside the AVG201x folder.
If you accidentally delete anything else go to the recycle bin and restore it.
Note: If you have already paid for the Tuneup addon then keep this folder​
4. Close the My Computer/Explorer window
5. Enable AVG self protection:
Right click the AVG icon in the taskbar (near the clock)
Select to Enable AVG Protection - takes 20 seconds or so to fully activate.​

To find the uid and gid for your username, use the following command:

id username

mkdir ~/.config/autostart
touch ~/.config/autostart/matchbox-keyboard.desktop


Then open the matchbox-keyboard.desktop file in your preferred editor (the .config folder is hidden so you may need to turn on show hidden files if you are looking in file manager) and add the details.

[Desktop Entry]
Name=Matchbox-keyboard
Exec=matchbox-keyboard
Type=application

State of Charge (SOC) Chart:

% of Charge - - - - Charging - - - At Rest - - - Discharging

100 - - - - - - - - - - - - 14.75 - - - - - - - - 12.70 - - - - - - 12.50
90 - - - - - - - - - - - - - 13.75 - - - - - - - - 12.58 - - - - - - 12.40
80 - - - - - - - - - - - - - 13.45 - - - - - - - - 12.46 - - - - - - 12.30
70 - - - - - - - - - - - - - 13.30 - - - - - - - - 12.36 - - - - - - 12.25
60 - - - - - - - - - - - - - 13.20 - - - - - - - - 12.28 - - - - - - 12.15
50 - - - - - - - - - - - - - 13.10 - - - - - - - - 12.20 - - - - - - 12.00
40 - - - - - - - - - - - - - 12.95 - - - - - - - - 12.12 - - - - - - 11.90
30 - - - - - - - - - - - - - 12.75 - - - - - - - - 12.02 - - - - - - 11.70
20 - - - - - - - - - - - - - 12.55 - - - - - - - - 11.88 - - - - - - 11.50
10 - - - - - - - - - - - - - 12.25 - - - - - - - - 11.72 - - - - - - 11.25

Shift + F2 then type restart in developer windows

FireFox 62 and Above is now    about:profiles   restart on the right.

To install windows 10 on Winbook TW802. You MUST DISABLE  the SSD write cache (Kingston S10032) in the control panel under device manager. Once win10 is install you must go into safe mode to disable it again to use the product.

Type:

egrep "lease|hostname|hardware|\}" /var/lib/dhcpd/dhcpd.leases