All Credit to http://johnbiehler.com/2016/06/05/monoprice-maker-select-mini-3d-printer/
For software, the manual recommends using Cura or Repetier. I like Cura so used that to prepare my files for printing. It should also work with Simplify 3D if you manually create a profile. I figure someone will ask for my Cura settings so here they are:
(https://s18.postimg.org/b3skigded/Cura1.png) (https://postimg.org/image/b3skigded/)
(https://s18.postimg.org/6unugaxad/Cura2.png) (https://postimg.org/image/6unugaxad/)